You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 8 Next »

    Page not found for multiexcerpt macro.
The page: A5ARNTUT:Lego Product Viz was not found. Please check/update the page name used in the 'multiexcerpt-include macro.

Importing the CAD Data

    Page not found for multiexcerpt macro.
The page: A5ARNTUT:Lego Product Viz was not found. Please check/update the page name used in the 'multiexcerpt-include macro.

Lighting

    Page not found for multiexcerpt macro.
The page: A5ARNTUT:Lego Product Viz was not found. Please check/update the page name used in the 'multiexcerpt-include macro.

  • Go to lights in the Create tab (Command Panel) and choose Arnold from the menu. Select Arnold Light (quad_light by default) and click in the viewport to create it. Position, orient and scale it so that it is slightly larger than the car as in the image below.

Scene lit with quad_light (exposure: 16)

    Page not found for multiexcerpt macro.
The page: A5ARNTUT:Lego Product Viz was not found. Please check/update the page name used in the 'multiexcerpt-include macro.

Realistic Shading using Standard Surface

Scene Converter

We will use the Scene Converter (Rendering -> Scene Converter...) to convert the in-built Physical materials to Arnold standard_surface shaders.

  • Under Current Preset, choose Arnold.
  • Under Materials (Conversion rules), choose Physical Material to Arnold Standard Surface [No Displacement].
  • Select Convert Scene. It should then proceed to convert the materials.
  • Once it has completed, go to the Slate Material Editor window. You should see that all of the Scene Materials are now Standard Surface.

Standard Surface 

    Page not found for multiexcerpt macro.
The page: A5ARNTUT:Lego Product Viz was not found. Please check/update the page name used in the 'multiexcerpt-include macro.

Lego plastic shader settings

 

Round Corners

 

    Page not found for multiexcerpt macro.
The page: A5ARNTUT:Lego Product Viz was not found. Please check/update the page name used in the 'multiexcerpt-include macro.

round_corners -> standard_surface.normal

 

Clip Geo shader

clip_geo does not currently work with GPU.

We can use the clip_geo shader to create a cut-away shading effect in the camera model.

  • Create a Box (geometry to be used for clipping) and position it where you want to clip the geometry.
  • Assign a clip_geo shader to the box. Position the cube so that it penetrates the car. When you render the scene, you should notice that it is cutting (clipping) into the car geometry (see title image at top). However, it may also clip the floor plane which we don't want.

 

To avoid clipping the floor plane:

  1. Add an Arnold Properties modifier to the plane.
  2. Create a trace set for the plane by entering a name in the shader Trace Sets text box (for example, "objects_not_to_clip").
  3. Disable the Inclusive checkbox of the clip_geo shader.
  4. Put the objects in that trace set (by entering the same trace set name for those shapes: "objects_not_to_clip").
  5. All objects not in that trace set will be clipped (the car model).

Cube with clip_geo assigned to it. The plane is not clipped because it has a Trace Set (Arnold Properties modifier) that matches the clip_geo Trace Set. Inclusive is disabled.

Stylized Shading using Toon 

  • Replace the standard_surface shaders with toon shaders. Change the following parameters:
    • Reduce the angle_threshold to around 10. This will give more detailed edges around the geometry.
    • Reduce the base_weight to 0. We want a flat color using emission only.
    • Ensure that specular_weight is 0.
    • Increase the emission_weight to 1.
  • Hide the floor plane/CYC geo.
  • Change the Background Color (Environment and Effects (8)) and render the scene.

To view the toon edge, you must change the filter type (sampling settings) to contourNote that increasing the contour filter width (sampling settings) value will increase render times.

  • You may notice that the contour filter_width appears too large (depending on your image size resolution). If it appears too thick, try reducing it to around 1.

Contour filter_width: 1. Rollover for contour filter_width: 2 (default).

toon -> Map to Material (assigned to geometry) with toon shader parameters

Final Render Settings

Ray Depth

When rendering with the CYC background geometry (scene link at top of page) the scene appears quite dark with the default diffuse_ray_depth of 1. Increasing this value will allow more light to bounce around the CYC and car geometry (at the expense of increased render time).

diffuse_ray_depth: 1 (default). Rollover image to view diffuse_ray_depth: 4.

Reducing Noise

For final frame rendering, we will need to increase some of the sampling settings.

Quad Light Samples

  • Select the quad_light light and increase the number of samples to 3 or 4. This should clean up a lot of the noise in the shadows.

quad_light.samples: 1 (default). Rollover image to view 4.

Diffuse Samples (Interior Noise)

There is some noise apparent in the interior and underneath the car. Increasing the number of diffuse_samples should clean this up.

Remember to check your AOVs if you are unsure where the noise is coming from. e.g. shadow (light_samples) or indirect light (diffuse_samples).

diffuse_samples: 2 (default). Rollover image to view diffuse_samples: 10.

Camera (AA) Samples

  • Finally, increase the number of Camera (AA) to around 5. The higher the number of samples, the better the anti-aliasing quality, and the longer the render times.

Camera (AA) samples: 3 (default). Rollover image to view Camera (AA) samples: 5.


That's it. You have reached the end of the tutorial. Well done! We encourage you to spend some more time with the MAXtoA user guide where you can find other tutorials such as this. 

 

 

  • If you render the scene, it will appear black using the default light exposure of 8. Increase the exposure to around 16. You should see something like the image below. Don't worry about the noise at this stage. It is because the default light samples are set to 1 and the default Camera (AA) samples are set to 3 for fast interactive rendering. We will adjust these settings later on when we are ready for final rendering.

Exposure is an f-stop value that multiplies the intensity by 2 to the power of the f-stop. Increasing the exposure by 1 results in double the amount of light.

Note that the Physical Scale value in the Exposure Control (Environment and Effects) has an influence over how your 3ds Max and Arnold lights render. You may need to disable or adjust the Physical Scale to get the intensity that you expect.


  • No labels
Privacy settings / Do not sell my personal information / Privacy/Cookies